ai-center
2022.4
true
AI Center Installation Guide
Automation CloudAutomation SuiteStandalone
Last updated Jun 6, 2024

Configuring the FQDN post-installation

To update the FQDN of AI Center, you need to run the installer again and make the following changes in the cluster_config.json file for all the nodes in the cluster.
  • fqdn - update this field with new FQDN that you need to access the cluster.
  • fixed_rke_address - if this value is identical to the fqdn field in cluster_config.json, then you need to update this value as well to reflect the new FQDN.
    Note: Changing the FQDN also requires new server certificates. If a new certificate is available, you have two options: either continue with the new self-signed certificate configured by the installer automatically, or stop the installation and bring in a new certificate.

    Changing the FQDN also requires a new identity access token.

    You can configure the certificate via the server_certificate field in cluster_config.json.

Updating the FQDN in single-node evaluation mode

To update the FQDN in single-node evaluation mode, take the following steps:

  1. Navigate to the UiPathAutomationSuite folder (the location of the installer bundle).
  2. Run the following command to update the FQDN:

Online

sudo ./install-uipath.sh -i ./cluster_config.json -o output.json -a --accept-license-agreementsudo ./install-uipath.sh -i ./cluster_config.json -o output.json -a --accept-license-agreement

Offline

Run the following command to update the FQDN for the infrastructure:

sudo ./install-uipath.sh -i ./cluster_config.json -o ./output.json -k --offline-bundle ./sf-infra.tar.gz --offline-tmp-folder /uipath/tmp --accept-license-agreementsudo ./install-uipath.sh -i ./cluster_config.json -o ./output.json -k --offline-bundle ./sf-infra.tar.gz --offline-tmp-folder /uipath/tmp --accept-license-agreement

Run the following command to update the FQDN for the fabric and services:

sudo ./install-uipath.sh -i ./cluster_config.json -o ./output.json -f -s --install-type offline --accept-license-agreementsudo ./install-uipath.sh -i ./cluster_config.json -o ./output.json -f -s --install-type offline --accept-license-agreement
Note: The installer warns you of the consequences of updating the FQDN. It asks for confirmation before proceeding further. The installer also warns you if there is no new valid certificate related to the FQDN.

Updating the FQDN in multi-node HA-ready production mode

To update the FQDN in multi-node HA-ready production mode, run the installer on all the machines (server and agent nodes). Note that the order of execution is very important. You first need to run the installer on all the servers, and then on all remaining agent nodes as well as the Task Mining node.

First server node

  1. Navigate to the UiPathAutomationSuite folder (the location of the installer bundle).
  2. Run the following command to update the FQDN:

Online

sudo ./install-uipath.sh -i cluster_config.json -o output.json -a --accept-license-agreementsudo ./install-uipath.sh -i cluster_config.json -o output.json -a --accept-license-agreement

Offline

Run the following command to update FQDN for the infrastructure:

sudo ./install-uipath.sh -i ./cluster_config.json -o ./output.json -k --offline-bundle ./sf-infra.tar.gz --offline-tmp-folder /uipath/tmp --accept-license-agreementsudo ./install-uipath.sh -i ./cluster_config.json -o ./output.json -k --offline-bundle ./sf-infra.tar.gz --offline-tmp-folder /uipath/tmp --accept-license-agreement

Run the following command to update FQDN for the fabric and services:

sudo ./install-uipath.sh -i ./cluster_config.json -o ./output.json -f -s --install-type offline --accept-license-agreementsudo ./install-uipath.sh -i ./cluster_config.json -o ./output.json -f -s --install-type offline --accept-license-agreement
Note: The installer warns you of the consequences of updating FQDN. It asks for confirmation before proceeding further. The installer also warns you if there is no new valid certificate related to the FQDN.

Subsequent server nodes

  1. Navigate to the UiPathAutomationSuite folder (the location of the installer bundle).
  2. Run the following command to update the FQDN:

Online

sudo ./install-uipath.sh -i cluster_config.json -o output.json -k -j server --accept-license-agreementsudo ./install-uipath.sh -i cluster_config.json -o output.json -k -j server --accept-license-agreement

Offline

sudo ./install-uipath.sh -i ./cluster_config.json -o ./output.json -k -j server --offline-bundle ./sf-infra.tar.gz --offline-tmp-folder /uipath/tmp --accept-license-agreementsudo ./install-uipath.sh -i ./cluster_config.json -o ./output.json -k -j server --offline-bundle ./sf-infra.tar.gz --offline-tmp-folder /uipath/tmp --accept-license-agreement
Note:

The differences between the command run on the first server node and the one used for the subsequent server nodes are as follows:

  • the -a option - replaced with -k to prevent running the fabric and service installer on any other nodes, which is only necessary for the first server machine.
  • the -j server option - used to differentiate between server and agent node.

Additional agent nodes and Task Mining node

  1. Navigate to the UiPathAutomationSuite folder (the location of the installer bundle).
  2. Run the following command to update the FQDN:

Online

sudo ./install-uipath.sh -i cluster_config.json -o output.json -k -j agent --accept-license-agreementsudo ./install-uipath.sh -i cluster_config.json -o output.json -k -j agent --accept-license-agreement

Offline

sudo ./install-uipath.sh -i ./cluster_config.json -o ./output.json -k -j agent --offline-bundle ./sf-infra.tar.gz --offline-tmp-folder /uipath/tmp --accept-license-agreementsudo ./install-uipath.sh -i ./cluster_config.json -o ./output.json -k -j agent --offline-bundle ./sf-infra.tar.gz --offline-tmp-folder /uipath/tmp --accept-license-agreement

Was this page helpful?

Get The Help You Need
Learning RPA - Automation Courses
UiPath Community Forum
Uipath Logo White
Trust and Security
© 2005-2024 UiPath. All rights reserved.